Bejeweler

Click here to see more pictures of the Bejeweler!

Click here to read my tips for using the Bejeweler!

The most advanced applicator on the market today.

Apply hot-fix crystals, pearls, rhinestuds & nailheads in seconds to almost any surface.

Easy to use - perfect for all kinds of crafts.

Ready to use in 4 minutes.

8 interchangeable tips - No Tools Required!

TIP: Clean the tips often. It is best to clean them while they are warm to remove glue build-up. A brass wire brush is best.

Brush: Sturdy German steel wire brush removes excess glue from your applicator tips.
Price: $3.00

Features of the Bejeweler™ Stone Styler:

Comfortable handle with rubberized grip

Interchangeable Tips - 2mm (6ss), 2.5mm (8ss), 3mm (10ss), 4mm (16ss), 5mm (20ss), 6mm (30ss), 7mm (34ss) & a flat tip (4mm).
(The flat tip works like a small iron. It doesn't pick anything up, but you place the metal or crystal where you want it, put the hot flat tip on top of them and the tip heats through and melts the glue that way.)

Suitable for large, irregular shapes

Warm-up time - approx. 4 minutes

NEW TIP! 18mm flat tip. Covers large areas. May also be used on ready-made designs. Won't melt through the plastic.
Price: $8.00

Click here to purchase our loose crystals!

Click here to purchase our loose metals!

Click here to purchase our loose rhinestuds!

Click here to purchase our loose pearls!

Click here to see some examples using our loose crystals and metals!

Here is the stand, and also a picture using the FLAT tip to place the flat stars on the bunny card.

	The flat tip acts like a mini-iron. There is no tip that will pick up the different shapes of metals. So, you place the metals where you want them, place the tool with the flat tip on top of the metal piece and heat through the metal to melt the glue.

Tips for using your Bejeweler!

Click here for Spanish translation.

***Our stones will not work on leather, glass, ceramics, etc.***

* Pick up the crystal with a light touch. And place it on your garment with a light touch. Always be in good lighting, because you want to watch the glue melt. First it will get wet looking, and then what I call "fuzzy navel" looking. Kind of bubbly. That is the time to place the crystal.

* Nothing is ever made perfectly, so if the tip won't pick up the crystal, you can place the crystal where you want it and then place the tip around the crystal. The only thing you aren't doing is actually picking up the crystal to place it. But at least this way, you can still heat the crystal up quickly in place, instead of using the flat tip.

* If a crystal falls out of the tip, let it cool off a little, pick it up, place it where you want it and put the tip around it again to re-heat the glue and stabilize it more.

* If a crystal gets stuck in the tip, place the tip where you want the crystal to come out on the garment, and take a t-pin or tweezer and slip it in the slits on the sides of the tip. Wedge out the crystal, and then again, place the tip around it to re-heat the glue and stabilize the crystal again. (This would also be an indication that you need to clean the tip.) Also, don't really push the tip down hard on the crystal. That might wedge it into the tip too much and it won't release.

* My natural tendency is to press down on the crystal after I place it, so you might want to wear a thimble or band-aid on your opposite finger. It is pretty warm!

* Our Swarovski crystals are just the same as others - best quality, but, in my opinion, the glue needs to be absorbed to be permanent and these are porous surfaces. They may work if you don't touch or handle or wash the item afterwards. That way they would look pretty, but wouldn't have to be as durable. We do have a lot of customers who decorate gourds, but that is a more porous surface also.

** Hope these tips help! It is so much fun to use the Bejeweler that you don't want to limit the use of it. Anything that the glue will absorb into, you'll be able to use the Bejeweler. Have fun!!! **